User Tools

Site Tools


ls1043ardb:install

Link to this comparison view

Both sides previous revision Previous revision
ls1043ardb:install [2017/03/15 13:30]
ben [Installing Rescue Image]
ls1043ardb:install [2017/03/15 13:38] (current)
ben [Installing Guinnux]
Line 212: Line 212:
 ===== Installing Guinnux ===== ===== Installing Guinnux =====
  
-The board should start now have booted ​into the Guinnux Rescue System. The board will need internet connectivity in order to install Guinnux. The Rescue System make use of eth2 i.e. RGMII1 for internet connectivity,​ thus connect this interface onto the LAN.+The board should start now and boot into the Guinnux Rescue System. The board will need internet connectivity in order to install Guinnux. The Rescue System make use of eth2 i.e. RGMII1 for internet connectivity,​ thus connect this interface onto the LAN.
  
 Login to the rescue system. User is ''​root''​ password is ''​bigbang''​ Login to the rescue system. User is ''​root''​ password is ''​bigbang''​
Line 224: Line 224:
 </​code>​ </​code>​
  
-Verify that the board has Internet connectivity. If needed use ''​nano''​ to edit the ''​%%/​etc%%/​network%%/​interfaces%%''​ file or the ''​%%/​etc%%/​resolv.conf''​ file to customise the network configuration to suit your networking environment.+Verify that the board has Internet connectivity. If neededuse ''​nano''​ to edit the ''​%%/​etc%%/​network%%/​interfaces%%''​ file or the ''​%%/​etc%%/​resolv.conf''​ file to customise the network configuration to suit your networking environment.
  
 Install Guinnux to the SD card by running the setup script. It is safe to answer yes to all questions. Install Guinnux to the SD card by running the setup script. It is safe to answer yes to all questions.
Line 234: Line 234:
   rescue:~ # reboot -f   rescue:~ # reboot -f
   ​   ​
-The board should now boot full blown Guinnux Aarch64 awesomeness. The user name and password for the full installation is also ''​root''​ / ''​bigbang''​ or ''​default''​ / ''​remote''​ for normal user access.+The board should now boot the full blown Guinnux Aarch64 awesomeness. The user name and password for the full installation is also ''​root''​ / ''​bigbang''​ or ''​default''​ / ''​remote''​ for normal user access.
  
 Point a web browser at the board and play with the Guinnux web configuration interface. Pretty much everything for the board can be configured from here. Have a look at the [[gnx5gettingstarted:​toc|getting started]] pages for more things to do. For the more adventurous,​ download the [[http://​downloads.guinnux.org/​toolchains/​aarch64-gnx5-linux-gnueabi.tar.bz2|Guinnux 5 Aarch64 toolchain]] and have a look at the [[gnx5howto:​toc|How To]] pages in order to cross compile some applications for Guinnux Point a web browser at the board and play with the Guinnux web configuration interface. Pretty much everything for the board can be configured from here. Have a look at the [[gnx5gettingstarted:​toc|getting started]] pages for more things to do. For the more adventurous,​ download the [[http://​downloads.guinnux.org/​toolchains/​aarch64-gnx5-linux-gnueabi.tar.bz2|Guinnux 5 Aarch64 toolchain]] and have a look at the [[gnx5howto:​toc|How To]] pages in order to cross compile some applications for Guinnux
  
ls1043ardb/install.txt ยท Last modified: 2017/03/15 13:38 by ben